Внимание! Цены указаны исключительно в информационных целях! Не являются публичной офертой и не могут быть использованы как коммерческое предложение. Просьба уточнять по телефону, e-mail, при оформлении заказа.
Напишите нам
zakaz1@nevalubricants.ru
Выберите офис/склад
Есть вопросы?
Хотите купить масло оптом?
Хотите купить масло оптом?
Оставьте свой номер телефона и мы свяжемся с вами
Обязательно для заполнения
Введите номер в формате +7 (XXX) XX-XX-XX
Mobilgrease 33, 16 кг. Смазка. (149549)
170 203 Р
Наличие по запросу
Артикул:
149549
Заказать звонок
Аналоги
Mobilgrease 33 is a high-performance lithium-complex grease designed for general-purpose aircraft use. Its consistency is between the NLGI grades 1 and 2. Mobilgrease 33 utilizes a 100% polyalphaolefin base oil and premium additives which ensure outstanding lubrication performance over a wide temperature range and operating conditions.
Features and Benefits
The lithium complex thickener system provides excellent structural stability and resistance to water wash-out. Polyalphaolefin base oil is used in Mobilgrease 33 because of its exceptional thermal/oxidative resistance potential, low volatility, and superb low-temperature capability, without the potential vulnerability of an ester base oil to degradation from reaction with water. The synthetic polyalphaolefin base oil offers excellent low-temperature mobility/pumpability and very low starting and running torque values. In addition, the state-of-the art additive system in Mobilgrease 33 provides superior rust and wear protection and load-carrying capacity compared to aviation greases that meet the minimum requirements of the MIL-PRF-23827 specification.
Features and Benefits
The lithium complex thickener system provides excellent structural stability and resistance to water wash-out. Polyalphaolefin base oil is used in Mobilgrease 33 because of its exceptional thermal/oxidative resistance potential, low volatility, and superb low-temperature capability, without the potential vulnerability of an ester base oil to degradation from reaction with water. The synthetic polyalphaolefin base oil offers excellent low-temperature mobility/pumpability and very low starting and running torque values. In addition, the state-of-the art additive system in Mobilgrease 33 provides superior rust and wear protection and load-carrying capacity compared to aviation greases that meet the minimum requirements of the MIL-PRF-23827 specification.
This product has the following approvals:
AIRBUS AIMS 09-06-002
BOEING BMS 3-33C Type 1
MIL-PRF-23827C
NATO G-354
This product meets or exceeds the requirements of:
SAE AMS3052
AIRBUS AIMS 09-06-002
BOEING BMS 3-33C Type 1
MIL-PRF-23827C
NATO G-354
This product meets or exceeds the requirements of:
SAE AMS3052
Показатели
Значение
Al/Ni Bronze Corrosiveness, 24 h, 100 C, Rating, SAE AMS3058 3.2.7.b
PASS
Base Oil Viscosity of Greases @ 100 C, mm2/s, AMS 1700
3
Base Oil Viscosity of Greases @ 40 C, mm2/s, AMS 1697
13
Boeing Dynamic Bearing Life, cycles, BMS 3-33
PASS
Bomb Oxidation, Pressure Drop, 100 h, kPa, ASTM D942
11
Color, Visual
Blue Green
Copper Strip Corrosion, 24 h, 100 C, Rating, ASTM D4048
1B
Dirt, # particles 25u to 74 u, FTM 3005
0
Dirt, # particles 75u or larger, FTM 3005
0
Dropping Point, °C, ASTM D2265
255
EMCOR Rust, 3% NaCl, IP 220
0,0
Evaporation Loss, 22 h, 100 C, mass%, ASTM D2595
1
Evaporation Loss, 500 h, 121 C, mass %, ASTM D2595
8,7
Four-Ball Extreme Pressure Test, Weld Load, kgf, ASTM D2596
700
Four-Ball Wear Test, Scar Diameter, mm, ASTM D2266
0.4
Fretting Wear, mg, ASTM D4170
0.6
Gear Wear Test, 2.3 kg load, 1000 cycles, gear wt loss, mg, FTM 335 (mod)
1,1
Gear Wear Test, 4.5 kg load, 1000 cycles, gear wt loss, mg, FTM 335 (mod)
1,6
High Temperature Performance, Hrs at 121 C, h, ASTM D3336
2,200+
Load Carrying Capacity, Load-Wear Index, kgf, ASTM D2596
110
NBR-L, AMS 3217/2 Compat, 70C 158 h, vol %, FTM 3603
12,6
Odor, OLFACTORY
PASS
Oil Separation, 30 h @ 100 C, mass%, ASTM D6184
4
Oxidation Stability, Pressure Drop, 500 h, kPa, ASTM D942
25
Penetration, 60X, 0.1 mm, ASTM D217
292
Penetration, Unworked, 0.1 mm, ASTM D217
285
Rust Protection, 48 h @ 125 F, Rating, ASTM D1743
0,0,0
Texture/Consistency, VISUAL
PASS
Timken OK Load, lb, ASTM D2509
55
Water Washout, Loss @ 38 C, wt%, ASTM D1264
3
Water Washout, Loss @ 79 C, wt%, ASTM D1264
6
Pen Worked X 100,000, 1/16" holes, 0.1 mm, FTM 313
330
Low Temperature Torque, Starting @ -73 C, Nm, ASTM D1478
0.52
Low Temperature Torque, Running @ -73 C, Nm, ASTM D1478
0.06
Mobilgrease 33 is a true multipurpose aviation grease intended for use in highly loaded anti-friction bearings, gears, and actuators as well as instruments, high speed bearings (though not recommended for wheel bearings), and general airframe lubrication, over operating temperatures from –100ºF to 250ºF (–73ºC to 121ºC). It can be used in all applications for which the aircraft manufacturer specifies U.S. Military Specification MIL-PRF-23827, Type I (Grease, Aircraft and Instrument, Gear and Actuator Screw, Grease thickened with metallic soap), Boeing BMS 3-33C (Grease, Aircraft, General Purpose), and Airbus AIMS09-06-002/SAE AMS3052 (Grease, General Purpose, Airframe, Low Temperature Range, Lithium Thickened). Mobilgrease 33 is listed in the Qualified Products List of Airbus, Boeing, and the U.S. Military for these specifications. The NATO Code Number for Mobilgrease 33 is G-354.